ADVANCED Codecs 歷史版本列表 Page1

最新版本 ADVANCED Codecs 13.0.0

ADVANCED Codecs 歷史版本列表

ADVANCED Codecs 為 Windows 7/8/10 是一個音頻和視頻編解碼器包。包括 32 位和 64 位版本。 ADVANCED 版本包含一整套編解碼器,標準編解碼器只包含 LAV 濾鏡和用於字幕的 xy-VSFilter.6235896 對於大多數用戶而言,編解碼器一直是個問題。這是因為從來沒有一個“開箱即用”的工作解決方案,一般的電腦用戶可以安裝,只是從一開始就正常工作。有幾個... ADVANCED Codecs 軟體介紹


ADVANCED Codecs 13.0.0 查看版本資訊

更新時間:2019-12-17
更新細節:

Rocrail 17-12-2019 (64-bit) 查看版本資訊

更新時間:2019-12-17
更新細節:

What's new in this version:

Rocrail 17-12-2019 (64-bit)
- Change log not available for this version


Rocrail 16-12-2019 (64-bit)
- Change log not available for this version


Rocrail 15-12-2019 (64-bit)
- Change log not available for this version


Rocrail 13-12-2019 (64-bit)
- Guiapp: fixes for merge node recursive and replace childs


Rocrail 11-12-2019 (64-bit)
- Change log not available for this version


Rocrail 09-12-2019 (64-bit)
- Change log not available for this version


Rocrail 08-12-2019 (64-bit)
- Change log not available for this version


Rocrail 07-12-2019 (64-bit)
- Change log not available for this version


Rocrail 05-12-2019 (64-bit)
- Xmlscript: trace correction
- Lightctrl: fix for turning lights off


Rocrail 04-12-2019 (64-bit)
- Block: fix for none recursive modify


Rocrail 03-12-2019 (64-bit)
- Modplan: fix for setting the z on addModule to prevent double levels
- Xmlscriptdlg: crash fix in case no lclist is available
- Wio: steerwheel angle added to the dirv command
- Wio: allow 250 speed steps


Rocrail 02-12-2019 (64-bit)
- block,loc: rear protection corrections
- wio: loco dirv mass parameter added for mobile
- block: check also for V=0 in case the enter trigger was resetted in case of rear protection
- modplan: fix for saving modules in case of deletions


Rocrail 01-12-2019 (64-bit)
- wiodlg: mobile type added


Rocrail 30-11-2019 (64-bit)
- Change log not available for this version


Rocrail 29-11-2019 (64-bit)
- Rocnetnode: set channels flags to make sure the servo goes in sleep mode after changing settings.
- Wio: filter out the 100 degree value


Rocrail 28-11-2019 (64-bit)
- Wiodlg: battery column without percent sign
- Wio: query with environment
- Finder: new option added to skip manual routes
- Guiframe: fix for assert loco grid select row if none exist
- Guiframe: fix for assert loco grid select row -1
- Guiframe: assert fix for select loco grid row -1


Rocrail 27-11-2019 (64-bit)
- Wiodlg: added include for standard integers
- Rocrailinidialog: show/edit rocweb image path
- Rocweb: html file type support added


Rocrail 26-11-2019 (64-bit)
- Wio: sensor pressure added


Rocrail 25-11-2019 (64-bit)
- Wio: temp100 support added
- Wio: use temperature from alive events


Rocrail 24-11-2019 (64-bit)
- Change log not available for this version


Rocrail 20-11-2019 (64-bit)
- Block: reset signals on exit option added
- Blockdialog: reset signals on exit
- Roclcdr: fix for checkinf shortin and inatpre2in
- Last time removal of dtc
- Z21: not trace unknown packets


Rocrail 19-11-2019 (64-bit)
- Change log not available for this version


Rocrail 18-11-2019 (64-bit)
- Loc: use modified direction on consist dispatch
- Wio: fix for old compiler
- Blockdialog: remove scale
- Block: use plan scale for mvtrack


Rocrail 15-11-2019 (64-bit)
- Change log not available for this version


Rocrail 14-11-2019 (64-bit)
- switch: ctc WIO blink LED support in case of pending


Rocrail 13-11-2019 (64-bit)
- Change log not available for this version


Rocrail 11-11-2019 (64-bit)
- Change log not available for this version


Rocrail 07-11-2019 (64-bit)
- Rocrailinidialog: wio options
- Rocrailinidlg: WIO options added
- Wio: watchdog timeout option
- Wio: show add to list trace at monitor level
- Makewin.sh: use bash instead of sh
- Wiodlg: layout correction
- Makewin.sh: added the zipper command
- Makewin.sh: simplified windows make script
- Cleanup
- Guiframe: report remark in case generic signal addresses
- Guiframe: report location split up in separate columns
- Version correction for rocs and lcdriver
- Report: show gate, description and decoder
- Signal: attribute rename addr -> addr1
- Wiodlg: fix for showing type LED on the index tab
- Guiframe: exclude the car list in case of accessory reporting
- Rocview: report action added
- Wio: trace correction for alive timeout
- Wio: POM cv number correction
- Trackdialog: show selected track on the plan panel
- Wio: binstate added
- Roads theme: fix for the twoway switch (Wolfgang)
- Wio: trace correction
- Loc: protect loco properties on field events
- Roads theme: more symbols (Wolfgang)
- Powerman: check if it is a booster event before generating a booster object
- Rocrailinidialog: generate booster option added
- Generate booster option in dialog
- Powerman: option for generating new boosters


Rocrail 06-11-2019 (64-bit)
- Makewin.sh: simplified windows make script
- Guiframe: report remark in case generic signal addresses
- Guiframe: report location split up in separate columns


Rocrail 03-11-2019 (64-bit)
- Change log not available for this version


Rocrail 31-10-2019 (64-bit)
- Change log not available for this version


Rocrail 23-10-2019 (64-bit)
- Wio: short circuit event added
- Wio: signal LED type support added bus:addr aspect
- Wio: remove ebreak from 127 speed steps
- Wio: fix for calculating decoder speed
- Wio: POM
- Wio: POM added
- Loc: swapondirchange reverted to revision 53
- Gotodlg: support for double click
- Wio: send speed steps
- Mvtrack: mvtrainlen var added, regard metrics for trainlen
- Switchdialog: translation typo fix
- Oc: swapondir at commands
- Wio: bus added to dcc loco commands
- Wio: mobile function support
- Switch/outputdlg: fix for channeltune dialog values
- Wiodlg: fix for I/O next/prev
- Mttmfcc: support for new bidi sensor module
- Loc: allow swap on dir change, but no support for multi head
- Wio: trace info at monitor level


Rocrail 16-10-2019 (64-bit)
- Text: convert display text from utf8 into iso latin


Rocrail 13-10-2019 (64-bit)
- Wio: send brighness with clock event
- Loc: fix for checking consist member
- Mvtrack: fix for save the calctrainlen option
- Wio: clock sync added
- Wio: text message type added
- Loc: fix for field direction


Rocrail 09-10-2019 (64-bit)
- Change log not available for this version


Rocrail 06-10-2019 (64-bit)
- Change log not available for this version


Rocrail 03-10-2019 (64-bit)
- Fine tune dialog for servo outputs and switches
- Wio: servo support


Rocrail 01-10-2019 (64-bit)
- Change log not available for this version


Rocrail 29-09-2019 (64-bit)
- Change log not available for this version


Rocrail 22-09-2019 (64-bit)
- Change log not available for this version


Rocrail 15954 (64-bit)
- Wio: sensor response added
- Clntcon,wio: fix for double wio broadcasts
- Wio: switch and output commands and events added


Rocrail 15949 (64-bit)
- Change log not available for this version


Rocrail 15943 (64-bit)
- mjpg: disable popups in case the data received is corrupt
- mjpg: crash fix
- mjpg: compile fix
- mjpg: wip for udp
- hue: fix for buffer overflow
- hue: free memory fix


Rocrail 15936 (64-bit)
- roco cam protocol


Rocrail 15935 (64-bit)
- Change log not available for this version


Rocrail 15931 (64-bit)
- rocdigs: makefile clear rascii dir
- demon plan: text pointsize correction


Rocrail 15928 (64-bit)
- infodialog: revert smalles font size for disclaimer
- infodialog: smaller font size for disclaimer
- infodialog: show system language
- infodialog: show wx system language code
- translation merge: de, cs, sl, fr, sr_latin, nl
- newfeatures update
- guiapp: added english variants for selecting language
- rocview: select language if none is set in the rocview.ini
- guiframe: try to get user language code


Rocrail 15916 (64-bit)
- Change log not available for this version


Rocrail 15905 (64-bit)
- Planpanel: fix for moving to other level
- Dccpp: fix for tcp port


Rocrail 15898 (64-bit)
- Change log not available for this version


Rocrail 15893 (64-bit)
- Rascii: signal type led support added
- Signal brightness added for LED signals
- Loc: regard gomanual on swap
- Rascii: set cts if wanted
- Loc: swap placing on direction change in half auto ode manual run
- Renderer: regard loco direction in case of flipping image
- Loc: evaluate field direction with current loco direction for optional swap block enter side
- Schedule: ignore automatic swap in case the loco runs in half automatic
- Schedule: ignore automatic swap in case the loco runs in half automatic mode


Rocrail 15884 (64-bit)
- Decoder: play sound async
- Decoder: play sound
- Loc: added state event
- Decoder.py: sample interpreter


Rocrail 15877 (64-bit)
- Ledbutton: memory leak fix
- Translation change for swapondir
- Mjpg,item: init text object on the fly
- Loc: swapondir option added


Rocrail 15869 (64-bit)
- Item,renderer: moved the MJPG from renderer to item
- 1oc: swap block enter side on direction change in case of manual or halb automatic mode
- Rascii: output color support added


Rocrail 15864 (64-bit)
- mjpg: use mutex to access and update the jpg image to show


Rocrail 15860 (64-bit)
- Ahome: http support
- Ahome: support for simple http outputs
- Ahome: support for simple http outputs added


Rocrail 15857 (64-bit)
- Block: save closed state
- Route: check for runable the tt and seltab too
- Renderer: destructor to clean up the MJPG class
- Throttledlg: use size event to rescale
- Throttledlg: revert to bitmap button


Rocrail 15850 (64-bit)
- Change log not available for this version


Rocrail 15840 (64-bit)
- Zipper: rocctrl.py added
- Zipper: canservice added
- Modplan: remove the deleted module also from the list to prevent saving it as empty plan
- Installwx: use the libwxgtk3.0-dev package
- Zipper; stylesheets added
- Throttle: set static bitmap background color to gray


Rocrail 15834 (64-bit)
- Control: fix for dependencies
- Mjpg,renderer: size fix for text
- Layout parent sizer after first bitmap update
- Rascii: 16 bit for CV get/set
- Throttledlg: locoimage mouse event handler added for selecting a loco
- Mjpg: fixes for text object


Rocrail 15824 (64-bit)
- Webview for macOS only until linux and windows do have fitting libraries
- Infodialog,renderer: webview also for linux
- Control: removed dependency webview
- Throttledlg: test wxWebView under Linux
- Dependency update for webview
- Video streaming in text and throttle
- Fback: regtrigger added
- Ahome: json power events
- Infodialog: disable webview includes in case of none apple
- Fback: format variable text


Rocrail 15816 (64-bit)
- Infodialog: disable webview includes in case of none apple
- Fback: format variable text
- Fback: format variable text in case the original value was a float
- Infodialog: commented out the webview
- Infodialog: check if a web kit is available
- Infodialog: webview is not included in the linux wxWidgets
- Infodialog: wiki tab added
- Action,model,xmlscript: use the var pubish function to broadcast changes
- Fback,var: publish register variables


Rocrail 15807 (64-bit)
- Fback: trace correction for regval
- Loc: check shunting state
- Powerctrldlg: remove minimal height of graphic
- Output: variable support in commands on/off
- Dumper: output support added
- Fback: array added for register value types
- Sbus: wip
- Hue: lux to brightness calculation
- Rocview: revert translation from class to group


Rocrail 15792 (64-bit)
- Change log not available for this version


Rocrail 15742 (64-bit)
- fcc: write accessory cv


Rocrail 15734 (64-bit)
- Change log not available for this version


Rocrail 15671 (64-bit)
- Desktoplink.sh: comment added
- Loc: trigger corrections for virtual timers
- Desktoplink.sh added for linux ZIP
- Zipper: create packege/history if needed
- Rocrail png icon added


Rocrail 15662 (64-bit)
- Change log not available for this version


Rocrail 15640 (64-bit)
- Removed wiringPI library
- Rocnetnode: added /dev/ttyAMA0 selection for dcc232
- Mbus: trace correction
- Dcc232: revert gpio
- Dcc232: WIP
- Dcc232: gpio WIP
- Dcc232: gpio WIP
- Dccd232: gpio WIP
- Analyse: fix for zoffset (Lothar)


Rocrail 15615 (64-bit)
- Zipper.sh: typo
- Zipper: linux support added
- Rocview.cmd: use absolute path for server binaries
- Zipper.sh: copy zip to package
- Zipper: $1 for w32/w64
- Zipper script added
- Rocview.cmd for zip installer
- Model: remove attribute modplan
- Text: replace pipe with
in case of html and concat


Rocrail 15608 (64-bit)
- Change log not available for this version


Rocrail 15604 (64-bit)
- switch: test trace twin address


Rocrail 15602 (64-bit)
- Change log not available for this version


Rocrail 15594 (64-bit)
- Change log not available for this version


Rocrail 15585 (64-bit)
- Infodialog: removed obsolete adjustminsize flag
- Donkeydlg: layout corrections
- Wsocket: trace correction in case the hostname query did fail
- Infodialog,rocguiinidlg: layout and translation corrections
- Donkey: added missing dialog title


Rocrail 15574 (64-bit)
- Control: tracelevel correction for action state does not match
- Rocweb: added text click command


Rocrail 15570 (64-bit)
- Canservice: report as CANID=0 and NN=0
- Text: fix for model command change
- Canservice: use same CANID and nodenumber as the GC1e in case of service on 5550
- Modplan: add all system actions
- Text: center option added


Rocrail 15558 (64-bit)
- text: fix for check action state


Rocrail 15554 (64-bit)
- Control: trace correction
- Mbus utils: fix for MERG standard CAN frame ID
- Canservice: avoid looping without sleep in case of tcp socket error
- Canservice: fix for standard ASCII frame
- Canservice: ascii framing support added
- Xmlscriptdlg: text commands added
- Text: click state for triggering actions added
- Modplan: read/save tour, waybill, link, weather, lightctrl and mvtrack
- Modplan: read and save module systemactions
- Modplan: read module system


Rocrail 15544 (64-bit)
- modplan: use modzoffset on modify; move, rotate


Rocrail 15543 (64-bit)
- Change log not available for this version


Rocrail 15533 (64-bit)
- Block: fix for action call for occupied
- Modplandlg: file dialog buttons added for loco and route xml


Rocrail 15531 (64-bit)
- Wrapper: default 3 trace files


Rocrail 15530 (64-bit)
- Location: fix for maxocc zero
- Route,switch: check if the switch has an address set on empty commands
- Switch: check for valid command
- Locationsdlg: layout correction
- Locationsdlg: layout correction


Rocrail 15525 (64-bit)
- mbus: support for UID in system commands and events


Rocrail 15518 (64-bit)
- Mbus: reject fnchanged -1
- Ocation: maxocc per cargo type
- Location: max commuter option added


Rocrail 15515 (64-bit)
- Schedules: reset callerid and callertype


Rocrail 15515 (64-bit)
- Control: set the IID in the callerid variable
- Check4redsignals option added, default off
- Wmz21: ignore bidikmh
- Mbus: send lights(f0) also after the speed/dir commands


Rocrail 15510 (64-bit)
- Win64 build: strip debug info


Rocrail 15506 (64-bit)
- System actions: sub state implemented for IID


Rocrail 15505 (64-bit)
- Location: disregard maxocc if the loco already did arrive
- Set UID to 21 if zero to be compatible with previous revisions
- Locationdlg: removed deprecated adjust flag
- Set uid on state report

Rocrail 15504 (64-bit)
- Change log not available for this version


Rocrail 15503 (64-bit)
- Change log not available for this version


Rocrail 15500 (64-bit)
- Trace: fix for empty trace file name
- Z21: uid field added
- Clntcon: fix for ping and reply with pong
- Rcon: reactivate the 5s idle ping
- Mqtt-cs: serial connect added
- Clntcon/rcon: set keepalive socket option


Rocrail 15498 (64-bit)
- Change log not available for this version


Rocrail 15494 (64-bit)
- Planpanel: save scroll position
- Mqtt-cs python example extended with XML parsing


Rocrail 15492 (64-bit)
- Item/guiframe: restore throttle position and size dependent from loco ID
- Rocview makefile: fix for wxsubincl 3.0 -> 3.1


Rocrail 15486 (64-bit)
- Signal: white address as bit pattern if port is zero
- Rocwebworker: support for https
- Rocwebworker: support for https
- Tracedlg: fix for close event (X)


Rocrail 15482 (64-bit)
- Rocweb: http return code correction for plan and options xml
- Evaluate function event
- Function control type added
- Translation merge: fr
- Xmlscriptdlg: replaced settargetrange with the 3.0 start/end function
- Aboxdlg: layout fixes
- EStW: threeway symbol added


Rocrail 15475 (64-bit)
- Change log not available for this version


Rocrail 15470 (64-bit)
- Xmlscriptdlg: try to select the complete invalid line
- Xmlscriptdlg: select invalid XML line
- Xmlscriptdlg: select text from invalid XML
- Block: fix for service wait
- Output: function type added


Rocrail 15465 (64-bit)
- Block: revert put out of operation behaviour in case from dialog
- Xmlscriptdlg: find added
- Xmldlg: find added


Rocrail 15462 (64-bit)
- Model: trace level correction
- Block: crosscheck fix for service
- MBUS: not evaluating type in case of UID zero
- Cv index support for accelleration and calibrating
- Xmlscript: block throttle command added
- Locdialog: show CV index in grid
- Mbus,rocpro: mfx cv index support
- Block: fix for wait and service
- Block: check if occupied in case of modify and new state should be close


Rocrail 15453 (64-bit)
- Tt: set accessory bit in case of f6915
- Xmlpointsize default set to 11
- Manifest: removed dpiAwareness
- Xml: add wrap and pointsize attribute

Rocrail 08-12-2019 (64-bit) 查看版本資訊

更新時間:2019-12-08
更新細節:

What's new in this version:

Rocrail 08-12-2019 (64-bit)
- Change log not available for this version


Rocrail 07-12-2019 (64-bit)
- Change log not available for this version


Rocrail 05-12-2019 (64-bit)
- Xmlscript: trace correction
- Lightctrl: fix for turning lights off


Rocrail 04-12-2019 (64-bit)
- Block: fix for none recursive modify


Rocrail 03-12-2019 (64-bit)
- Modplan: fix for setting the z on addModule to prevent double levels
- Xmlscriptdlg: crash fix in case no lclist is available
- Wio: steerwheel angle added to the dirv command
- Wio: allow 250 speed steps


Rocrail 02-12-2019 (64-bit)
- block,loc: rear protection corrections
- wio: loco dirv mass parameter added for mobile
- block: check also for V=0 in case the enter trigger was resetted in case of rear protection
- modplan: fix for saving modules in case of deletions


Rocrail 01-12-2019 (64-bit)
- wiodlg: mobile type added


Rocrail 30-11-2019 (64-bit)
- Change log not available for this version


Rocrail 29-11-2019 (64-bit)
- Rocnetnode: set channels flags to make sure the servo goes in sleep mode after changing settings.
- Wio: filter out the 100 degree value


Rocrail 28-11-2019 (64-bit)
- Wiodlg: battery column without percent sign
- Wio: query with environment
- Finder: new option added to skip manual routes
- Guiframe: fix for assert loco grid select row if none exist
- Guiframe: fix for assert loco grid select row -1
- Guiframe: assert fix for select loco grid row -1


Rocrail 27-11-2019 (64-bit)
- Wiodlg: added include for standard integers
- Rocrailinidialog: show/edit rocweb image path
- Rocweb: html file type support added


Rocrail 26-11-2019 (64-bit)
- Wio: sensor pressure added


Rocrail 25-11-2019 (64-bit)
- Wio: temp100 support added
- Wio: use temperature from alive events


Rocrail 24-11-2019 (64-bit)
- Change log not available for this version


Rocrail 20-11-2019 (64-bit)
- Block: reset signals on exit option added
- Blockdialog: reset signals on exit
- Roclcdr: fix for checkinf shortin and inatpre2in
- Last time removal of dtc
- Z21: not trace unknown packets


Rocrail 19-11-2019 (64-bit)
- Change log not available for this version


Rocrail 18-11-2019 (64-bit)
- Loc: use modified direction on consist dispatch
- Wio: fix for old compiler
- Blockdialog: remove scale
- Block: use plan scale for mvtrack


Rocrail 15-11-2019 (64-bit)
- Change log not available for this version


Rocrail 14-11-2019 (64-bit)
- switch: ctc WIO blink LED support in case of pending


Rocrail 13-11-2019 (64-bit)
- Change log not available for this version


Rocrail 11-11-2019 (64-bit)
- Change log not available for this version


Rocrail 07-11-2019 (64-bit)
- Rocrailinidialog: wio options
- Rocrailinidlg: WIO options added
- Wio: watchdog timeout option
- Wio: show add to list trace at monitor level
- Makewin.sh: use bash instead of sh
- Wiodlg: layout correction
- Makewin.sh: added the zipper command
- Makewin.sh: simplified windows make script
- Cleanup
- Guiframe: report remark in case generic signal addresses
- Guiframe: report location split up in separate columns
- Version correction for rocs and lcdriver
- Report: show gate, description and decoder
- Signal: attribute rename addr -> addr1
- Wiodlg: fix for showing type LED on the index tab
- Guiframe: exclude the car list in case of accessory reporting
- Rocview: report action added
- Wio: trace correction for alive timeout
- Wio: POM cv number correction
- Trackdialog: show selected track on the plan panel
- Wio: binstate added
- Roads theme: fix for the twoway switch (Wolfgang)
- Wio: trace correction
- Loc: protect loco properties on field events
- Roads theme: more symbols (Wolfgang)
- Powerman: check if it is a booster event before generating a booster object
- Rocrailinidialog: generate booster option added
- Generate booster option in dialog
- Powerman: option for generating new boosters


Rocrail 06-11-2019 (64-bit)
- Makewin.sh: simplified windows make script
- Guiframe: report remark in case generic signal addresses
- Guiframe: report location split up in separate columns


Rocrail 03-11-2019 (64-bit)
- Change log not available for this version


Rocrail 31-10-2019 (64-bit)
- Change log not available for this version


Rocrail 23-10-2019 (64-bit)
- Wio: short circuit event added
- Wio: signal LED type support added bus:addr aspect
- Wio: remove ebreak from 127 speed steps
- Wio: fix for calculating decoder speed
- Wio: POM
- Wio: POM added
- Loc: swapondirchange reverted to revision 53
- Gotodlg: support for double click
- Wio: send speed steps
- Mvtrack: mvtrainlen var added, regard metrics for trainlen
- Switchdialog: translation typo fix
- Oc: swapondir at commands
- Wio: bus added to dcc loco commands
- Wio: mobile function support
- Switch/outputdlg: fix for channeltune dialog values
- Wiodlg: fix for I/O next/prev
- Mttmfcc: support for new bidi sensor module
- Loc: allow swap on dir change, but no support for multi head
- Wio: trace info at monitor level


Rocrail 16-10-2019 (64-bit)
- Text: convert display text from utf8 into iso latin


Rocrail 13-10-2019 (64-bit)
- Wio: send brighness with clock event
- Loc: fix for checking consist member
- Mvtrack: fix for save the calctrainlen option
- Wio: clock sync added
- Wio: text message type added
- Loc: fix for field direction


Rocrail 09-10-2019 (64-bit)
- Change log not available for this version


Rocrail 06-10-2019 (64-bit)
- Change log not available for this version


Rocrail 03-10-2019 (64-bit)
- Fine tune dialog for servo outputs and switches
- Wio: servo support


Rocrail 01-10-2019 (64-bit)
- Change log not available for this version


Rocrail 29-09-2019 (64-bit)
- Change log not available for this version


Rocrail 22-09-2019 (64-bit)
- Change log not available for this version


Rocrail 15954 (64-bit)
- Wio: sensor response added
- Clntcon,wio: fix for double wio broadcasts
- Wio: switch and output commands and events added


Rocrail 15949 (64-bit)
- Change log not available for this version


Rocrail 15943 (64-bit)
- mjpg: disable popups in case the data received is corrupt
- mjpg: crash fix
- mjpg: compile fix
- mjpg: wip for udp
- hue: fix for buffer overflow
- hue: free memory fix


Rocrail 15936 (64-bit)
- roco cam protocol


Rocrail 15935 (64-bit)
- Change log not available for this version


Rocrail 15931 (64-bit)
- rocdigs: makefile clear rascii dir
- demon plan: text pointsize correction


Rocrail 15928 (64-bit)
- infodialog: revert smalles font size for disclaimer
- infodialog: smaller font size for disclaimer
- infodialog: show system language
- infodialog: show wx system language code
- translation merge: de, cs, sl, fr, sr_latin, nl
- newfeatures update
- guiapp: added english variants for selecting language
- rocview: select language if none is set in the rocview.ini
- guiframe: try to get user language code


Rocrail 15916 (64-bit)
- Change log not available for this version


Rocrail 15905 (64-bit)
- Planpanel: fix for moving to other level
- Dccpp: fix for tcp port


Rocrail 15898 (64-bit)
- Change log not available for this version


Rocrail 15893 (64-bit)
- Rascii: signal type led support added
- Signal brightness added for LED signals
- Loc: regard gomanual on swap
- Rascii: set cts if wanted
- Loc: swap placing on direction change in half auto ode manual run
- Renderer: regard loco direction in case of flipping image
- Loc: evaluate field direction with current loco direction for optional swap block enter side
- Schedule: ignore automatic swap in case the loco runs in half automatic
- Schedule: ignore automatic swap in case the loco runs in half automatic mode


Rocrail 15884 (64-bit)
- Decoder: play sound async
- Decoder: play sound
- Loc: added state event
- Decoder.py: sample interpreter


Rocrail 15877 (64-bit)
- Ledbutton: memory leak fix
- Translation change for swapondir
- Mjpg,item: init text object on the fly
- Loc: swapondir option added


Rocrail 15869 (64-bit)
- Item,renderer: moved the MJPG from renderer to item
- 1oc: swap block enter side on direction change in case of manual or halb automatic mode
- Rascii: output color support added


Rocrail 15864 (64-bit)
- mjpg: use mutex to access and update the jpg image to show


Rocrail 15860 (64-bit)
- Ahome: http support
- Ahome: support for simple http outputs
- Ahome: support for simple http outputs added


Rocrail 15857 (64-bit)
- Block: save closed state
- Route: check for runable the tt and seltab too
- Renderer: destructor to clean up the MJPG class
- Throttledlg: use size event to rescale
- Throttledlg: revert to bitmap button


Rocrail 15850 (64-bit)
- Change log not available for this version


Rocrail 15840 (64-bit)
- Zipper: rocctrl.py added
- Zipper: canservice added
- Modplan: remove the deleted module also from the list to prevent saving it as empty plan
- Installwx: use the libwxgtk3.0-dev package
- Zipper; stylesheets added
- Throttle: set static bitmap background color to gray


Rocrail 15834 (64-bit)
- Control: fix for dependencies
- Mjpg,renderer: size fix for text
- Layout parent sizer after first bitmap update
- Rascii: 16 bit for CV get/set
- Throttledlg: locoimage mouse event handler added for selecting a loco
- Mjpg: fixes for text object


Rocrail 15824 (64-bit)
- Webview for macOS only until linux and windows do have fitting libraries
- Infodialog,renderer: webview also for linux
- Control: removed dependency webview
- Throttledlg: test wxWebView under Linux
- Dependency update for webview
- Video streaming in text and throttle
- Fback: regtrigger added
- Ahome: json power events
- Infodialog: disable webview includes in case of none apple
- Fback: format variable text


Rocrail 15816 (64-bit)
- Infodialog: disable webview includes in case of none apple
- Fback: format variable text
- Fback: format variable text in case the original value was a float
- Infodialog: commented out the webview
- Infodialog: check if a web kit is available
- Infodialog: webview is not included in the linux wxWidgets
- Infodialog: wiki tab added
- Action,model,xmlscript: use the var pubish function to broadcast changes
- Fback,var: publish register variables


Rocrail 15807 (64-bit)
- Fback: trace correction for regval
- Loc: check shunting state
- Powerctrldlg: remove minimal height of graphic
- Output: variable support in commands on/off
- Dumper: output support added
- Fback: array added for register value types
- Sbus: wip
- Hue: lux to brightness calculation
- Rocview: revert translation from class to group


Rocrail 15792 (64-bit)
- Change log not available for this version


Rocrail 15742 (64-bit)
- fcc: write accessory cv


Rocrail 15734 (64-bit)
- Change log not available for this version


Rocrail 15671 (64-bit)
- Desktoplink.sh: comment added
- Loc: trigger corrections for virtual timers
- Desktoplink.sh added for linux ZIP
- Zipper: create packege/history if needed
- Rocrail png icon added


Rocrail 15662 (64-bit)
- Change log not available for this version


Rocrail 15640 (64-bit)
- Removed wiringPI library
- Rocnetnode: added /dev/ttyAMA0 selection for dcc232
- Mbus: trace correction
- Dcc232: revert gpio
- Dcc232: WIP
- Dcc232: gpio WIP
- Dcc232: gpio WIP
- Dccd232: gpio WIP
- Analyse: fix for zoffset (Lothar)


Rocrail 15615 (64-bit)
- Zipper.sh: typo
- Zipper: linux support added
- Rocview.cmd: use absolute path for server binaries
- Zipper.sh: copy zip to package
- Zipper: $1 for w32/w64
- Zipper script added
- Rocview.cmd for zip installer
- Model: remove attribute modplan
- Text: replace pipe with
in case of html and concat


Rocrail 15608 (64-bit)
- Change log not available for this version


Rocrail 15604 (64-bit)
- switch: test trace twin address


Rocrail 15602 (64-bit)
- Change log not available for this version


Rocrail 15594 (64-bit)
- Change log not available for this version


Rocrail 15585 (64-bit)
- Infodialog: removed obsolete adjustminsize flag
- Donkeydlg: layout corrections
- Wsocket: trace correction in case the hostname query did fail
- Infodialog,rocguiinidlg: layout and translation corrections
- Donkey: added missing dialog title


Rocrail 15574 (64-bit)
- Control: tracelevel correction for action state does not match
- Rocweb: added text click command


Rocrail 15570 (64-bit)
- Canservice: report as CANID=0 and NN=0
- Text: fix for model command change
- Canservice: use same CANID and nodenumber as the GC1e in case of service on 5550
- Modplan: add all system actions
- Text: center option added


Rocrail 15558 (64-bit)
- text: fix for check action state


Rocrail 15554 (64-bit)
- Control: trace correction
- Mbus utils: fix for MERG standard CAN frame ID
- Canservice: avoid looping without sleep in case of tcp socket error
- Canservice: fix for standard ASCII frame
- Canservice: ascii framing support added
- Xmlscriptdlg: text commands added
- Text: click state for triggering actions added
- Modplan: read/save tour, waybill, link, weather, lightctrl and mvtrack
- Modplan: read and save module systemactions
- Modplan: read module system


Rocrail 15544 (64-bit)
- modplan: use modzoffset on modify; move, rotate


Rocrail 15543 (64-bit)
- Change log not available for this version


Rocrail 15533 (64-bit)
- Block: fix for action call for occupied
- Modplandlg: file dialog buttons added for loco and route xml


Rocrail 15531 (64-bit)
- Wrapper: default 3 trace files


Rocrail 15530 (64-bit)
- Location: fix for maxocc zero
- Route,switch: check if the switch has an address set on empty commands
- Switch: check for valid command
- Locationsdlg: layout correction
- Locationsdlg: layout correction


Rocrail 15525 (64-bit)
- mbus: support for UID in system commands and events


Rocrail 15518 (64-bit)
- Mbus: reject fnchanged -1
- Ocation: maxocc per cargo type
- Location: max commuter option added


Rocrail 15515 (64-bit)
- Schedules: reset callerid and callertype


Rocrail 15515 (64-bit)
- Control: set the IID in the callerid variable
- Check4redsignals option added, default off
- Wmz21: ignore bidikmh
- Mbus: send lights(f0) also after the speed/dir commands


Rocrail 15510 (64-bit)
- Win64 build: strip debug info


Rocrail 15506 (64-bit)
- System actions: sub state implemented for IID


Rocrail 15505 (64-bit)
- Location: disregard maxocc if the loco already did arrive
- Set UID to 21 if zero to be compatible with previous revisions
- Locationdlg: removed deprecated adjust flag
- Set uid on state report

Rocrail 15504 (64-bit)
- Change log not available for this version


Rocrail 15503 (64-bit)
- Change log not available for this version


Rocrail 15500 (64-bit)
- Trace: fix for empty trace file name
- Z21: uid field added
- Clntcon: fix for ping and reply with pong
- Rcon: reactivate the 5s idle ping
- Mqtt-cs: serial connect added
- Clntcon/rcon: set keepalive socket option


Rocrail 15498 (64-bit)
- Change log not available for this version


Rocrail 15494 (64-bit)
- Planpanel: save scroll position
- Mqtt-cs python example extended with XML parsing


Rocrail 15492 (64-bit)
- Item/guiframe: restore throttle position and size dependent from loco ID
- Rocview makefile: fix for wxsubincl 3.0 -> 3.1


Rocrail 15486 (64-bit)
- Signal: white address as bit pattern if port is zero
- Rocwebworker: support for https
- Rocwebworker: support for https
- Tracedlg: fix for close event (X)


Rocrail 15482 (64-bit)
- Rocweb: http return code correction for plan and options xml
- Evaluate function event
- Function control type added
- Translation merge: fr
- Xmlscriptdlg: replaced settargetrange with the 3.0 start/end function
- Aboxdlg: layout fixes
- EStW: threeway symbol added


Rocrail 15475 (64-bit)
- Change log not available for this version


Rocrail 15470 (64-bit)
- Xmlscriptdlg: try to select the complete invalid line
- Xmlscriptdlg: select invalid XML line
- Xmlscriptdlg: select text from invalid XML
- Block: fix for service wait
- Output: function type added


Rocrail 15465 (64-bit)
- Block: revert put out of operation behaviour in case from dialog
- Xmlscriptdlg: find added
- Xmldlg: find added


Rocrail 15462 (64-bit)
- Model: trace level correction
- Block: crosscheck fix for service
- MBUS: not evaluating type in case of UID zero
- Cv index support for accelleration and calibrating
- Xmlscript: block throttle command added
- Locdialog: show CV index in grid
- Mbus,rocpro: mfx cv index support
- Block: fix for wait and service
- Block: check if occupied in case of modify and new state should be close


Rocrail 15453 (64-bit)
- Tt: set accessory bit in case of f6915
- Xmlpointsize default set to 11
- Manifest: removed dpiAwareness
- Xml: add wrap and pointsize attribute

ADVANCED Codecs 12.9.0 查看版本資訊

更新時間:2019-12-08
更新細節:

DrawPile 2.1.15 查看版本資訊

更新時間:2019-12-07
更新細節:

What's new in this version:

Server changes:
- Added support for list server API 1.6
- Added ext_host and ext_port fields to status API endpoint
- Abuse report token can now be set via admin API
- List server whitelist can now be edited via the API
- Fixed memory leak in admin API
- The server can now also serve web admin site static files
- Server-gui: Added "welcome message" field
- Bugfixes and improvements
- Drawpile-cmd: OpenRaster export format now works
- Added command line option to override data and config paths (portable app mode)
- Added "closed" session list filtering option
- Added "Add" button to join dialog for adding the server's associated list server

GameLoop - Android Emulator 1.0.0.1 查看版本資訊

更新時間:2019-12-07
更新細節:

ADVANCED Codecs 12.8.0 查看版本資訊

更新時間:2019-11-23
更新細節:

Freegate 7.69 查看版本資訊

更新時間:2019-11-22
更新細節:

Screamer Radio 1.0 (2019-11-22) 查看版本資訊

更新時間:2019-11-22
更新細節:

What's new in this version:

Screamer Radio 1.0 (2019-11-22)
Changes:
- Show warning for users with old .NET Framework versions, upcoming releases will require .NET Framework 4.7.2 or newer

Bug fixes:
- Fixed bug affecting notifications in application
- Fixed bugs when importing stations with no website URLs

Other:
- Added more internal error handling to prevent crashes
- Some internal improvements
- WIll now automatically check for upgrades at most once per day, not every startup


Screamer Radio 1.0 (2019-10-07)
- Fixed an issue that could cause the program to crash when clicking the tabs


Screamer Radio 1.0 (2019-10-06)
New features:
- Added always on top toggle to view menu
- Added output device selection to audio menu
- Added visualization frequency setting, can now also be turned off
- Prevent computer from sleeping while playing (can be changed in settings)

Changes:
- Better grouping of settings in settings tab
- Moved settings to view menu
- Moved view menu next to help menu

Improvements:
- Improved scroll bars, they now behave like normal scroll bars
- Level visualization rewritten from scratch, should use much less processing power
- Better looking drop down boxes

Other:
- Removed 32-bit restriction, will run as a 64-bit process on 64-bit systems
- Some minor performance improvements


Screamer Radio 1.0 (2019-02-04)
New features:
- Add "Center window" menu option to system tray menu
- Automatically center the window if it starts up off screen

Improvements:
- Change of output device no longer requires stopping playback
- Default output device will automatically switch when the system device setting changes
- Window centering should now work on high DPI screens
- Improve how browsers are launched when clicking links

Bug fixes:
- Fix race condition when closing
- Fix internal exception when reading stream metadata
- Fix crash bug in about tab

Other:
- Upgrade BASS to version 2.4.14


Screamer Radio 1.0 (2018-10-01)
Minor tweaks:
- Restore volume on restart even if the last played station can not be loaded
- More detailed error messages when sound subsystem fails

Other:
- Internal component updates and code improvements


Screamer Radio 1.0 (2018-09-21)
Bug fixes:
- Fixed issue when loading history on startup
- Fixed startup deadlock issue

Other:
- Will no longer wait forever to read/write files


Screamer Radio 1.0 (2018-09-01)
Bug fixes:
- Fixed a few internal bugs caused by race conditions
- Playback was not stopped when desktop was locked
- Connect to random crashed when station list was empty

Other:
- Refactored file I/O with improved locking mechanism
- Some other internal refactorings
- Removed some legacy ClickOnce code
- Remove .NET assembly signing, code signing is enough
- Upgraded dependencies

DrawPile 2.1.14 查看版本資訊

更新時間:2019-11-17
更新細節:

What's new in this version:

- Fixed dab spacing in default brush presets
- Fixed that selecting a brush preset could change the eraser slot into a non-erasing mode
- Fixed brush preset reordering by drag&drop
- Fixed that pressing spacebar while drawing would cause strange input handling behavior
- Bugfix: don't allow pasting by drag&drop if cut&paste is disabled